www.tmatlantic.com
Test & Soldering Equipment On-line Store |
D.E.V.I.C.E. (Wiki)Calculators Services |
Filter by first letter
ABCDEFGHIJKLMNOPQRSTUVWXYZ+-
Reset |
OscilloscopesSearch by section D.E.V.I.C.E. services
External synchronization signal is a synchronizing pulse which is external relatively to the measuring device (oscilloscope, generator, logic analyzer etc.) and it usually synchronizes with the system under test.
An eye diagram is created when many short segments of a waveform are superimposed such that the nominal edge locations and voltage levels are aligned.
The time period for which the pulse level changes starting from the top reference value (usually 90 %) down to the low reference value (usually 10%)
FFF is one of the auto measurement types of a digital oscilloscope located in the time domain (“Delay” menu item), which is used for the measurement of the time delay between the first falling edge of channel 1 and the first falling edge of channel 2.
FFR - is one of the auto measurement types of a digital oscilloscope located in the time domain (“Delay” menu item) which is used for the measurement of the time delay between the first falling edge of channel 1 and the first rising edge of channel 2.
Fast Fourier transform (FFT) is a digital oscilloscope mathematical function which converts a time-domain signal into its frequency components mathematically namely performing signal spectral analysis.
FRF - is one of the auto measurement types of a digital oscilloscope located in the time domain (“Delay” menu item) which is used for the measurement of the time delay between the first rising edge of channel 1 and the first falling edge of channel 2.
Articles 31 - 40 of 118 First | Prev. | 2 3 4 5 6 | Next | Last |
|
Site mapPrivacy policyTerms of Use & Store PoliciesHow to BuyShippingPayment |