www.tmatlantic.com
Test & Soldering Equipment On-line Store |
D.E.V.I.C.E. (Wiki)Calculators Services |
Filter by first letter
ABCDEFGHIJKLMNOPQRSTUVWXYZ+-
Reset |
StandardsSearch by section D.E.V.I.C.E. servicesAmerican Wire Gauge (AWG) is a logarithmic stepped standardized wire gauge system used for the diameters of round, solid, nonferrous, electrically conducting wire.
Controller Area Network (CAN bus) is a standard serial communication protocol, meaning that its support of distributed real-time control and multiplexing allows for the interchange of information among the different components of a vehicle.
LTE (3GPP Long Term Evolution) is the name of the mobile data transfer protocol. 3GPP is a standard to improve CDMA, UMTS technologies in order to meet data transfer rate requirements in the future.
LXI is the standard for LAN equipped instrumentation that helps reduce the time it takes to set up, configure, and debug test systems.
NI created PXI (PCI eXtension for Instrumentation) in 1997 to be an open standard for test hardware. PXI is now a leading industry standard for automated test with more than 60 vendors offering specialty modules.
Restriction of Hazardous Substances in Electrical and Electronic Equipment.
EU rules restricting the use of hazardous substances in electrical and electronic equipment to protect the environment and public health.
SCPI is the Standard Commands for Programmable Instruments based on the IEEE488.1 and IEEE488.2 Standards. It conforms to IEEE754 Standard for Floating-Point Arithmetic, ISO646 7-bit Coded Character Sets for Information Exchange, and other kinds of standards.
The VXIbus provides a time-tested bus you can trust to support your automated test and measurement needs.
Waste from Electrical and Electronic Equipment.
EU rules on treating waste electrical and electronic equipment, to contribute to sustainable production and consumption.
|
Measurement History Events
|
|
Site mapPrivacy policyTerms of Use & Store PoliciesHow to BuyShippingPayment |