Industry news

RSS

Tektronix Expands Integrated Instrument Portfolio with MDO4000C Mixed Domain Oscilloscope
01/15/2016 | 1356
Tektronix, Inc., the world's leading manufacturer of oscilloscopes, introduced the MDO4000C Series of Mixed Domain Oscilloscopes that can be configured with up to six instruments in a single unit including a full spectrum analyzer. Starting with the highest-performance oscilloscope of any 6-in-1 instrument from Tektronix, engineers can upgrade their MDO4000C instruments over time to meet their most demanding challenges and add functionality as needs change or budgets allow.

Nationwide DVB-T2 network in Albania uses Rohde & Schwarz solutions
01/12/2016 | 1366
Albania’s public broadcaster RTSH (Albanian Radio and Television) is converting its nationwide broadcast network to DVB-T2. Rohde & Schwarz is delivering a turnkey solution. 96.5 percent of the population in Albania will then receive digital DVB-T2 signals. Analog TV will be switched off.

Keysight Technologies Introduces Industry's First DisplayPort 1.3 Source Electrical Performance, Validation, Compliance Software
01/08/2016 | 1420
Keysight Technologies, Inc. announced the industry's first DisplayPort 1.3 source compliance and validation software. The U7232D DisplayPort 1.3 compliance and validation test software runs on Keysight's industry-leading Infiniium oscilloscopes and provides a complete compliance test suite for the extensive physical-layer tests required for DisplayPort 1.3 source devices.

Anritsu Introduces High-speed Serial BUS Receiver Test Solution Featuring MP1800A BERT Signal Quality Analyzer
01/05/2016 | 1381
Anritsu Company announces an integrated test solution featuring its MP1800A BERT Signal Quality Analyzer (SQA) and innovative software by Granite River Labs (GRL) that simplifies calibration so engineers can conduct high-quality reproducible receiver and jitter tolerance tests on high-speed devices.

First commercial test solution for 5G channel sounding from Rohde & Schwarz opens up new spectral worlds
01/01/2016 | 1543
What started with GSM is now continuing on an exponential scale with fifth generation mobile radio (5G). Manufacturers of base stations and end user devices are facing the challenge of opening time and location dependent radio channels. This is why Rohde & Schwarz developed a test solution that characterizes the envisaged 5G spectra. The test system comprises a signal and spectrum analyzer, a vector signal generator and the new R&S TS-5GCS test software. Users can select the analyzer and generator depending on their channel frequency and bandwidth requirements.

Keysight Technologies' UXM Enables 600 Mbps Data Throughput Testing with 4x4 DL MIMO, Carrier Aggregation, Advanced Integrated Channel Emulation
12/29/2015 | 1350
Keysight Technologies, Inc. announced the successful verification of category 12 data rates with just two component carriers using the UXM's new downlink 4x4 MIMO capabilities. Using two 20 MHz component carriers, 64 QAM downlink modulation, and 4x4 downlink MIMO techniques, Keysight demonstrated 600 Mbps downlink rates using two UXM wireless test sets connected in an array.

Anritsu Introduces ShockLine™ VNA Solutions to Lower Test Costs Associated with Verifying E-band, Microwave Passive Component Performance
12/25/2015 | 1208
Anritsu Company introduces an E-band option for its ShockLine™ MS46500B series of 2- and 4-port performance Vector Network Analyzers (VNAs) that addresses the market need to lower cost-of-test for E-band components. With the option installed, the MS46500B series can reduce production costs and more efficiently verify the performance of high-frequency passive components, such as antennas, filters, and duplexers, during manufacturing.

The most distance with less power - TI's new Sub-1 GHz solution spans 20 km on a coin cell
12/22/2015 | 1166
Texas Instruments (TI) announced the availability of the next device in the SimpleLink™ ultra-low power platform, designed to help customers easily add ultra-low power, long-range connectivity to their Internet of Things (IoT) designs. The new SimpleLink Sub-1 GHz CC1310 wireless microcontrollers (MCUs) offers up to 20 years of battery life for building and factory automation, alarm and security, smart grid and wireless sensor network applications.

Keysight Technologies Introduces PAM-4 Capability for its Advanced Design System Channel Simulator
12/18/2015 | 1309
Keysight Technologies, Inc. announced a four-level pulsed amplitude modulation (PAM-4) capability for the Keysight EEsof EDA Advanced Design System (ADS) Channel Simulator. The introduction of this capability further advances Keysight's leadership position in IBIS-AMI SerDes channel simulation.

Anritsu Simplifies Tower Optical Link Verification with Video Inspection Probe for Site Master™ Handheld Analyzers
12/15/2015 | 1248
Anritsu Company continues to provide the most comprehensive test solutions for the installation and maintenance of legacy and emerging wireless networks with the introduction of a Video Inspection Probe (VIP) measurement mode for its Microwave Site Master™ S820E and Site Master™ S331L cable and antenna analyzers. The new VIP mode, a no-cost feature included with firmware revision V1.17 or higher, specifically addresses the ever-growing requirement to inspect optical fiber cables used to carry traffic data and signaling up/down to/from the radio hardware in modern wireless communication systems.


News 921 - 930 of 1460
First | Prev. | 91 92 93 94 95 | Next | Last
Site map|Privacy policy|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc., 2010-2024