Industry news

What started with GSM is now continuing on an exponential scale with fifth generation mobile radio (5G). Manufacturers of base stations and end user devices are facing the challenge of opening time and location dependent radio channels. This is why Rohde & Schwarz developed a test solution that characterizes the envisaged 5G spectra. The test system comprises a signal and spectrum analyzer, a vector signal generator and the new R&S TS-5GCS test software. Users can select the analyzer and generator depending on their channel frequency and bandwidth requirements.

Keysight Technologies, Inc. announced the successful verification of category 12 data rates with just two component carriers using the UXM's new downlink 4x4 MIMO capabilities. Using two 20 MHz component carriers, 64 QAM downlink modulation, and 4x4 downlink MIMO techniques, Keysight demonstrated 600 Mbps downlink rates using two UXM wireless test sets connected in an array.

Anritsu Company introduces an E-band option for its ShockLine™ MS46500B series of 2- and 4-port performance Vector Network Analyzers (VNAs) that addresses the market need to lower cost-of-test for E-band components. With the option installed, the MS46500B series can reduce production costs and more efficiently verify the performance of high-frequency passive components, such as antennas, filters, and duplexers, during manufacturing.

Texas Instruments (TI) announced the availability of the next device in the SimpleLink™ ultra-low power platform, designed to help customers easily add ultra-low power, long-range connectivity to their Internet of Things (IoT) designs. The new SimpleLink Sub-1 GHz CC1310 wireless microcontrollers (MCUs) offers up to 20 years of battery life for building and factory automation, alarm and security, smart grid and wireless sensor network applications.

Keysight Technologies, Inc. announced a four-level pulsed amplitude modulation (PAM-4) capability for the Keysight EEsof EDA Advanced Design System (ADS) Channel Simulator. The introduction of this capability further advances Keysight's leadership position in IBIS-AMI SerDes channel simulation.

Anritsu Company continues to provide the most comprehensive test solutions for the installation and maintenance of legacy and emerging wireless networks with the introduction of a Video Inspection Probe (VIP) measurement mode for its Microwave Site Master™ S820E and Site Master™ S331L cable and antenna analyzers. The new VIP mode, a no-cost feature included with firmware revision V1.17 or higher, specifically addresses the ever-growing requirement to inspect optical fiber cables used to carry traffic data and signaling up/down to/from the radio hardware in modern wireless communication systems.

Rohde & Schwarz introduces the R&S HMO1202 mixed signal oscilloscopes, a new family of entry-level instruments that deliver outstanding performance. A bandwidth of up to 300 MHz coupled with comprehensive math and FFT analysis functions make them eminently suitable for professional analysis of digital signals.

Keysight Technologies, Inc. introduced the enhanced U8903B audio analyzer with new Bluetooth audio measurement capabilities. The Bluetooth option enables the U8903B to make high-performance Bluetooth audio testing for R&D, quality assurance and production tests in the consumer and professional audio and wireless communication industries.

Tektronix, Inc., the world's leading manufacturer of oscilloscopes, announced the industry's first fully automated physical layer transmitter test solution for the MIPI® M-PHY® 3.1 specification and Conformance Test Suite (CTS) 3.1. The solution supports M-PHY High Speed Gears 1, 2 and 3, PWM Mode (G0-G7), and SYS Mode and offers the industry's lowest noise solution for M-PHY measurements when used with Tektronix DPO70000SX or MSO/DPO70000DX oscilloscopes and P7600 series probes.

Texas Instruments (TI) introduced the industry's lowest latency and highest electrostatic discharge (ESD) industrial Gigabit Ethernet physical layers (PHYs). The new family of six devices enables engineers to bring real-time industrial Internet of Things (IIoT) capabilities to rugged factory automation systems, motor drives, and test and measurement equipment. The new DP83867 family meets stringent electromagnetic interference (EMI) and electromagnetic compatibility (EMC) standards, reduces power consumption, and offers designers flexibility with multiple temperature, media access control (MAC) interface and packaging options.

News 951 - 960 of 1486
First | Prev. | 94 95 96 97 98 | Next | Last