| www.tmatlantic.com
Test & Soldering Equipment On-line Store |
|
D.E.V.I.C.E. (Wiki)Calculators Services |
|||||
Filter by first letter
|
OscilloscopesSearch by section D.E.V.I.C.E. services
Trigger source generates a signal for the registration. In most of cases triggering is used being synchronized with the registered and displayed signal.
The most well-known trigger types are: Edge trigger, Pulse trigger, Video signal trigger, Slope trigger and Alternative trigger.
UltraVision innovative technology combines easy navigation of the captured signal, deep memory depth, ultra-wide dynamic range, perfect signal capture ratio, signal record with wide capabilities of its analysis, variable functions of triggering and decoding, signal displaying with controllable brightness.
A type of automatic measurements. Voltage between Vmax and Vmin of a waveform excluding overshoots. 
A type of automatic measurements. Average signal voltage measurement for the first cycle in digital oscilloscopes. 
A type of automatic measurements. Measures the lowest voltage over the entire waveform excluding overshoots.
Synchronization on video signal is used for the edge or line trigger from the synchronizing pulses of the standard video signals. The trigger mode on video signal is used to carry out the oscillograms of video signals fields and lines in NTSC, PAL or SECAM standards. 
A type of automatic measurements. The most positive peak voltage measured over the entire waveform. 
A type of automatic measurements. The most negative peak voltage measured over the entire waveform. 
A type of automatic measurements. Measures the absolute difference between the maximum and minimum peak voltage of the entire waveform. 
A type of automatic measurements. The true Root Mean Square voltage over the entire waveform. 
A type of automatic measurements. Measures the highest voltage over the entire waveform excluding overshoots. 
Wave Inspector is a standard function of any Tektronix DPO3000 series models, considered innovative. It significantly simplifies ordinary and at the same time laborious debugging tasks: recorded signals research in order to find some separate events of interest. Earlier it was made manually by the data scrolling and the check of the passing signal flow.
Oscillogram waveform recorder is oscilloscope mode for automatic storage of the required input signal waveform frames within the specified time interval.
White noise is a random signal (or process) with a flat power spectral density. In other words, the signal contains equal power within a fixed bandwidth at any center frequency. White noise draws its name from white light in which the power spectral density of the light is distributed over the visible band in such a way that the eye's three color receptors (cones) are approximately equally stimulated.
The trigger is made at the signal input into the threshold window or the signal output out of it.
X-Y mode is a specialized two-channel mode of oscilloscopes when the signal of channel 1 is used for the deviation along the horizontal axis (X) and the signal of channel 2 – along the vertical axis (Y).
Zoom or fragment expansion mode allows expanding a marked oscillogram zone in the horizontal area throughout the full width of the display. Such fragment expansion of the basic oscillogram is used for more detailed signal analysis with higher horizontal resolution.
Articles 101 - 118 of 118 First | Prev. | 1 2 3 | Next | Last |
Measurement History Events
|
|