Industry news

RSS

Rohde & Schwarz extends frequency range of its industry leading R&S SMA100B RF and microwave signal generator up to 67 GHz
07/23/2019 | 849
The analog microwave signal generator R&S SMA100B now provides microwave signals up to 67 GHz with industry-leading RF performance. In overrange operation, it even provides signals up to 72 GHz. The R&S SMA100B generates signals with lowest single sideband phase noise and highest output power with extremely low harmonics at the same time.

NI Introduces mmWave Test Solution to Accelerate the Race to 5G Commercialization
07/19/2019 | 718
NI, the provider of a software-defined platform that helps accelerate the development and performance of automated test and automated measurement systems, announced the mmWave Vector Signal Transceiver (VST) to address the test challenges of 5G mmWave RFIC transceivers and power amplifiers. This product will be demonstrated at NIWeek 2019 in multi-site production test configurations for packaged part and wafer-level test and in validation test configurations using over-the-air measurements.

Tektronix Expands Performance Oscilloscopes with New 13 GHz and 16 GHz Models
07/16/2019 | 853
Tektronix, Inc., announced the expansion of its scalable DPO70000SX Series Performance Oscilloscope to include new 13 GHz and 16 GHz models. The new offerings allow engineers to take advantage of the high sample rate and low noise floor of Tektronix’ highest performance family of oscilloscopes at lower bandwidth levels and more affordable price points.

Rohde & Schwarz equips Czech air traffic control with VCS simulation systems
07/12/2019 | 810
The Air Navigation Services of the Czech Republic (ANS CR) modernizes its voice communications system (VCS) for simulation and training and has chosen Rohde & Schwarz to supply the new turnkey solution. The core of the project is the R&S VCS-4G technology, with a total number of almost 200 controller working positions for the ATC simulators at locations in Prague, Brno, Ostrava and Karlovy Vary.

TI introduces the first system basis chip with integrated CAN FD controller and transceiver
07/09/2019 | 776
Texas Instruments (TI) introduced an automotive system basis chip that is the industry’s first to integrate a controller and transceiver for Controller Area Network with Flexible Data Rate (CAN FD). Designed to meet the high-bandwidth and data-rate flexibility needs of in-vehicle networks, the TCAN4550-Q1 uses the Serial Peripheral Interface (SPI) bus of almost any microcontroller to implement, with minimal hardware changes, a CAN FD interface or increase the amount of CAN FD bus ports in a system.

Rohde & Schwarz verifies 5G NR performance and QoE using commercially released smartphones in live 5G networks
07/05/2019 | 865
Rohde & Schwarz has conducted first field tests of network performance and quality from the end-user perspective on a live 5G NR network using commercially available 5G NR devices such as the Samsung S10 5G. This is an important step to verify that the 5G network performance supports the demanding technical requirements and delivers the required Quality of Experience to the end user. Rohde & Schwarz mobile network testing solutions for engineering, site acceptance, optimization, benchmarking and monitoring offer the ability to conduct such measurements using commercially available smartphones.

Keysight Enables Qualcomm to Demonstrate Industry’s First 5G Laptop with Integrated Modem at Computex
07/02/2019 | 915
Keysight Technologies, Inc., a leading technology company that helps enterprises, service providers and governments accelerate innovation to connect and secure the world, announced that the company's 5G network emulation solutions were used by Qualcomm Technologies, Inc., a subsidiary of Qualcomm Incorporated, to successfully demonstrate the industry's first 5G laptop with integrated modem at Computex, a leading global ICT and IoT show in Taipei, Taiwan.

NI Releases New Wireless Hardware for Online Asset Condition Monitoring
06/28/2019 | 870
NI, the provider of a software-defined platform that helps accelerate the development and performance of automated test and automated measurement systems, announced new wireless monitoring hardware for InsightCM, the most open solution for online condition monitoring on the market with full access to data and customization with the InsightCM Software Development Kit.

Anritsu Introduces First VNAs to Specify 43.5 GHz Performance in K-Connector Environment to Address Emerging High-frequency Applications
06/25/2019 | 824
Anritsu Company introduces a 43.5 GHz frequency option for its 2- and 4-port ShockLine™ MS46122B, MS46322B, MS46522B, and MS46524B vector network analyzers (VNAs) with guaranteed specifications using Anritsu’s Extended-K™ type connectors and components. The ShockLine family becomes the first VNA to support specified 43.5 GHz functionality in a K-connector environment, creating distinct cost-of-test and time-to-market advantages in high-frequency applications, including 5G, satellite, and signal integrity.

University of Sydney uses R&S RTB2000 and R&S RTM3000 oscilloscopes from Rohde & Schwarz in their labs
06/18/2019 | 914
The School of Physics at the University of Sydney recently replaced their existing oscilloscopes with R&S RTB2000 and R&S RTM3000 oscilloscopes from Rohde & Schwarz.


News 571 - 580 of 1459
First | Prev. | 56 57 58 59 60 | Next | Last
Site map|Privacy policy|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc., 2010-2024