www.tmatlantic.com
Test & Soldering Equipment On-line Store |
|
D.E.V.I.C.E. (Wiki)Calculators Services |
Industry news![]()
![]() 06/30/2020 | 671
By adding the R&S NRP90T und R&S NRP90TN models to its portfolio of thermal power sensors, Rohde & Schwarz releases the very first test and measurement instruments in the market to support the novel, robust 1.35 mm precision coaxial connector. The connector covers frequencies up to 90 GHz and shall be included in the next releases of both IEEE and IEC relevant standards. Rohde & Schwarz has been a partner in the 1.35 mm E connector development project since its beginning in 2017.
![]() 06/26/2020 | 657
Tektronix, Inc. launched its new TekExpress DDR5 Transmitter Solution which allows engineers to overcome DFE analysis challenges with improved automation, confidently and efficiently validate and debug DDR5 designs with user-defined acquisition and master DDR5 de-embedding techniques with Serial Data Link Analysis (SDLA).
![]() 06/23/2020 | 882
Keysight Technologies, Inc., a leading technology company that helps enterprises, service providers and governments accelerate innovation to connect and secure the world, announced PathWave Waveform Analytics, an edge-to-cloud computing application that improves anomaly detection and reduces data storage costs in pre-silicon validation using machine learning algorithms.
![]() 06/19/2020 | 649
Anritsu Company announced that Inseego Corp. had integrated several Anritsu Radio Communication Test Station MT8000A solutions, as well as the 5G NR Mobile Device Test Platform ME7834NR and New Radio RF Conformance Test System ME7873NR into its San Diego facility. The MT8000A will be used for device verification, the ME7834NR for protocol conformance testing, and the ME7873NR for RF conformance testing to ensure the performance of Inseego’s 5G products.
![]() 06/16/2020 | 672
The R&S ESW is an EMI test receiver with outstanding RF characteristics for the measuring range from 1 Hz to 44 GHz. With its high dynamic range und measurement accuracy, it meets the highest requirements in EMI compliance testing and fulfills the most stringent requirements for all relevant EMI standards such as CISPR, EN, MIL STD-461, DO 160 and FCC.
![]() 06/12/2020 | 639
Yokogawa Electric Corporation announces that it’s completed the acquisition of all shares in Denmark-based Grazper Technologies ApS (Grazper), as mutually agreed. Grazper has developed advanced artificial intelligence (AI) technologies for analyzing images, and Yokogawa aims to leverage these technologies within its various existing businesses and to develop new industrial AI solutions.
![]() 06/09/2020 | 619
Keysight Technologies, Inc., a leading technology company that helps enterprises, service providers and governments accelerate innovation to connect and secure the world, announced it is accelerating the development of flexible virtualized networks and high-value mobile services with NVIDIA.
![]() 06/05/2020 | 693
Anritsu Company introduces the IQ Fiber Master™ MT2780A multi-port CPRI-based RF and PIM analyzer that is the first instrument to perform true PIM analysis over fiber and present RF spectrum results derived from IQ data. The MT2780A reduces test costs and time by providing field engineers, field technicians, and third-party contractors with a single instrument to conduct RF interference measurements and PIM troubleshooting on LTE-based systems using CPRI front haul infrastructure.
![]() 06/02/2020 | 740
Tektronix, Inc. announced the new 2601B-PULSE System SourceMeter® 10μs Pulser/SMU Instrument, integrating a high-speed current pulser with DC source and measurement functions in one instrument. The new system incorporates PulseMeter™ technology for sourcing current pulses as short as 10μsec at 10A and 10V without the need to manually tune the output to match device impedance up to 3μH.
![]() 05/29/2020 | 655
Rohde & Schwarz is continuously extending its portfolio of test solutions for 5G base stations and the associated massive MIMO antenna arrays and amplifiers. Highlights include an OTA test solution with frontend modules specifically for the 5G FR2 range and a solution for speed-optimized tests of 5G base stations. Both are ideal for use in production. There is also a new, innovative test solution that allows developers to perform cross-channel measurements with up to 4x4 MIMO in the FR1 range.
News 431 - 440 of 1417 First | Prev. | 42 43 44 45 46 | Next | Last |
|
Site mapPrivacy policyTerms of Use & Store PoliciesHow to BuyShippingPayment![]() ![]() ![]() ![]() ![]() |