Industry news

RSS

Tektronix Releases 4 Series B Mixed Signal Oscilloscope, Increasing Processing Power for Quicker Analysis & Data Transfer Speed
12/19/2023 | 1060
Tektronix, Inc, a leading provider in test and measurement solutions and Fortive (NYSE:FTV) company, announced the launch of its 4 Series B Mixed Signal Oscilloscope (MSO) featuring state-of-the-art measurement performance capabilities on all channels, unmatched user experience, and advanced analysis capabilities.

Anritsu Introduces Butler Matrix Module that Simulates 8x8 MIMO Connection to Support All 5G FR1 Bands
12/15/2023 | 530
Anritsu Company introduces its Butler Matrix 8x8 MA8118A module that simulates 8x8 MIMO connections for efficient 5G UE throughput tests. Designed for use with the industry-leading Radio Communication Test Station MT8000A, the MA8118A Butler Matrix is a transmission path with 8 input and 8 output ports and supports the 0.6 GHz to 7.125 GHz 5G Frequency Range (FR 1) bands, expanding the MT8000A’s ability to conduct efficient tests on 5G FR1 UEs.

Unique Rohde & Schwarz 170 GHz power sensors ease use and traceability in the D-band
12/06/2023 | 636
Rohde & Schwarz is launching the new R&S NRP170TWG(N) thermal power sensor for precise power level measurements in the D-band. It is the only RF power sensor on the market that offers full traceability to national metrology institutes (NMI) in the frequency range from 110 GHz to 170 GHz, an important prerequisite for commercializing the frequency band. The R&S NRP170TWG(N) hardware is designed to reduce measurement noise and drift, while remaining very accurate and easy to use. The sensors are fully calibrated plug & play devices that can be easily integrated into any measurement setup with a USB or LAN connection.

Keysight and MediaTek Successfully Complete 5G New Radio and RedCap Interoperability Testing
12/04/2023 | 714
Keysight Technologies, Inc. and MediaTek have successfully completed 5G New Radio (NR) and 5G reduced capability (RedCap) interoperability development testing (IODT) based on the 3GPP Release 17 (Rel-17) standard. The testing verified the latest MediaTek 5G modem technologies using Keysight's 5G Network Emulation Solutions.

Anritsu Enhances WLAN Tester Network Mode to Support Wi-Fi 7
11/29/2023 | 551
Anritsu Company introduces an option that supports the latest IEEE 802.11be Wi-Fi 7 WLAN standard for its Wireless Connectivity Test Set MT8862A. With this new expanded capability, the MT8862A extends its Wi-Fi support to evaluate Wi-Fi 7 signal quality with its Network Mode, allowing engineers to conduct accurate, repeatable tests to ensure the signal quality of Wi-Fi 7 devices.

UAE’s GCAA awards Rohde & Schwarz for radio transformation at Sheikh Zayed Centre
11/27/2023 | 593
Rohde & Schwarz awarded prestigious “Radio Replacement” project by GCAA, involving upgrade of over 200 ATC radios as an enhancement to already installed voice communications infrastructure at the Sheikh Zayed Air Navigation Centre in Abu Dhabi.

Keysight Introduces Optimized In-line High Density In-Circuit Test System for Printed Circuit Board Assemblies
11/24/2023 | 664
Keysight Technologies, Inc. introduces the new Keysight i3070 Series 7i in-line test system, an automated in-circuit test system (ICT), offering increased capacity and throughput, that enables manufacturers to economically meet the complex test demands of larger node count printed circuit board assembly (PCBAs).

Webinar ”Common Industry Terms for Calibration Contract Review” by Tektronix
11/22/2023 | 559
Join Tektronix for the webinar "Common Industry Terms for Calibration Contract Review" that will be held on December 6, 2023! Jennifer Fleenor, Tektronix's Service Quality Manager and Stephanie Morin, A2LA's Calibration Accreditation Manager will explain common industry terms and definitions used in communication between a customer and a calibration provider, as part of a contract review.

Anritsu announced a new Uplink Interference measurement to identify interference in 5G and LTE TDD networks
11/20/2023 | 397
Anritsu Company is announcing enhanced functionality to the Field Master™ spectrum analyzer LTE and 5G measurement options. As the rollout and densification of 5G networks accelerates, degradation of network performance resulting from interference in the TDD uplink is becoming more prominent.

When innovation meets production – Rohde & Schwarz exhibits at productronica 2023
11/17/2023 | 458
Innovation and production – hand in hand. This is the Rohde & Schwarz motto for this year’s productronica, where the company will present itself as a reliable partner for electronics manufacturing needs. Rohde & Schwarz has determined five pivotal areas of interest, each reflecting its commitment to pushing technological boundaries: (1) secure production, (2) efficiency in RF component manufacturing, (3) electronic module and device production testing, (4) calibration and repair services and (5) electronic manufacturing services. In addition, visitors can experience a new T&M highlight at the booth: The R&S MXO 5 is the first eight-channel oscilloscope from Rohde & Schwarz.


News 131 - 140 of 1444
First | Prev. | 12 13 14 15 16 | Next | Last
Site map|Privacy policy|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc., 2010-2024