www.tmatlantic.com
Test & Soldering Equipment On-line Store |
|
D.E.V.I.C.E. (Wiki)Calculators Services |
Industry news![]()
![]() 12/15/2023 | 500
Anritsu Company introduces its Butler Matrix 8x8 MA8118A module that simulates 8x8 MIMO connections for efficient 5G UE throughput tests. Designed for use with the industry-leading Radio Communication Test Station MT8000A, the MA8118A Butler Matrix is a transmission path with 8 input and 8 output ports and supports the 0.6 GHz to 7.125 GHz 5G Frequency Range (FR 1) bands, expanding the MT8000A’s ability to conduct efficient tests on 5G FR1 UEs.
![]() 12/06/2023 | 595
Rohde & Schwarz is launching the new R&S NRP170TWG(N) thermal power sensor for precise power level measurements in the D-band. It is the only RF power sensor on the market that offers full traceability to national metrology institutes (NMI) in the frequency range from 110 GHz to 170 GHz, an important prerequisite for commercializing the frequency band. The R&S NRP170TWG(N) hardware is designed to reduce measurement noise and drift, while remaining very accurate and easy to use. The sensors are fully calibrated plug & play devices that can be easily integrated into any measurement setup with a USB or LAN connection.
![]() 12/04/2023 | 679
Keysight Technologies, Inc. and MediaTek have successfully completed 5G New Radio (NR) and 5G reduced capability (RedCap) interoperability development testing (IODT) based on the 3GPP Release 17 (Rel-17) standard. The testing verified the latest MediaTek 5G modem technologies using Keysight's 5G Network Emulation Solutions.
![]() 11/29/2023 | 535
Anritsu Company introduces an option that supports the latest IEEE 802.11be Wi-Fi 7 WLAN standard for its Wireless Connectivity Test Set MT8862A. With this new expanded capability, the MT8862A extends its Wi-Fi support to evaluate Wi-Fi 7 signal quality with its Network Mode, allowing engineers to conduct accurate, repeatable tests to ensure the signal quality of Wi-Fi 7 devices.
![]() 11/27/2023 | 564
Rohde & Schwarz awarded prestigious “Radio Replacement” project by GCAA, involving upgrade of over 200 ATC radios as an enhancement to already installed voice communications infrastructure at the Sheikh Zayed Air Navigation Centre in Abu Dhabi.
![]() 11/24/2023 | 631
Keysight Technologies, Inc. introduces the new Keysight i3070 Series 7i in-line test system, an automated in-circuit test system (ICT), offering increased capacity and throughput, that enables manufacturers to economically meet the complex test demands of larger node count printed circuit board assembly (PCBAs).
![]() 11/22/2023 | 539
Join Tektronix for the webinar "Common Industry Terms for Calibration Contract Review" that will be held on December 6, 2023! Jennifer Fleenor, Tektronix's Service Quality Manager and Stephanie Morin, A2LA's Calibration Accreditation Manager will explain common industry terms and definitions used in communication between a customer and a calibration provider, as part of a contract review.
![]() 11/20/2023 | 374
Anritsu Company is announcing enhanced functionality to the Field Master™ spectrum analyzer LTE and 5G measurement options. As the rollout and densification of 5G networks accelerates, degradation of network performance resulting from interference in the TDD uplink is becoming more prominent.
![]() 11/17/2023 | 437
Innovation and production – hand in hand. This is the Rohde & Schwarz motto for this year’s productronica, where the company will present itself as a reliable partner for electronics manufacturing needs. Rohde & Schwarz has determined five pivotal areas of interest, each reflecting its commitment to pushing technological boundaries: (1) secure production, (2) efficiency in RF component manufacturing, (3) electronic module and device production testing, (4) calibration and repair services and (5) electronic manufacturing services. In addition, visitors can experience a new T&M highlight at the booth: The R&S MXO 5 is the first eight-channel oscilloscope from Rohde & Schwarz.
![]() 11/15/2023 | 489
Keysight Technologies, Inc. has validated the first protocol conformance test case for 3rd Generation Partnership Project (3GPP) Release 17 (Rel-17) standards for non-terrestrial networks using narrowband internet of things (NB-IoT) technology. The validated test case, which is for use with Keysight's 5G network emulation conformance test platform (TP168), was obtained at the Conformance Agreement Group (CAG) #76 meeting of the Global Certification Forum (GCF).
News 101 - 110 of 1413 First | Prev. | 9 10 11 12 13 | Next | Last |
|
Site mapPrivacy policyTerms of Use & Store PoliciesHow to BuyShippingPayment![]() ![]() ![]() ![]() ![]() |