www.tmatlantic.com
Test & Soldering Equipment On-line Store |
D.E.V.I.C.E. (Wiki)Calculators Services |
Industry news
10/22/2014 | 1383
Tektronix, Inc., the world's leading manufacturer of oscilloscopes, announced the industry's first complete PHY layer and conformance test solution for JEDEC LPDDR4, the next generation of mobile memory technology. Slated for adoption starting in 2015, LPDDR4 builds on the current generation of LPDDR3 technology and will deliver improved data rates up to 4.26 Gb/sec and use an ultra-low voltage core to reduce power consumption by approximately 35 percent to enhance performance in mobile devices like smartphones, wearables & tablets.
10/20/2014 | 1473
Keysight Technologies, Inc. introduced the U4301B PCIe® protocol analyzer for engineers developing PCIe Gen3 systems. The U4301B supports all PCIe speeds from 2.5 GT/s (Gen1) through 8 GT/s (Gen3) and link widths from x1 through x16. The analyzer comes standard with analysis tools to validate PCIe LTSSM (link training and status state machine) processes, as well as NVM (non-volatile memory) Express and AHCI (advanced host controller interface) transactional protocol operations. New interposers support the latest storage devices that use SFF-8639 and M.2 connectors.
10/17/2014 | 1752
Yokogawa Electric Corporation announces that it has greatly enhanced the FieldMate™ Versatile Device Management Wizard and will release R3.01 on October 17. FieldMate is a versatile software program for configuring, adjusting, and managing a wide variety of field devices used in factories and other production sites. Starting today, a trial version of R3.01 will be available on Yokogawa's website.
10/14/2014 | 1618
When electronica 2014 opens its doors to an international audience in Munich this November, Rohde & Schwarz will naturally be there. The Munich-based company is using the home advantage to showcase its extensive portfolio of test and measurement equipment.
10/08/2014 | 1339
NI (Nasdaq: NATI), the provider of solutions that enable engineers and scientists to solve the world’s greatest engineering challenges, announced the industry’s widest bandwidth high-performance 26.5 GHz microwave vector signal analyzer (VSA) and a fast tuning 20 GHz continuous wave signal generator. The two new instruments complement the extensive NI modular instruments offering and expand the measurement capabilities of the PXI platform.
10/06/2014 | 1341
Anritsu Company breaks new ground in field wireless test with the introduction of the MW82119B PIM Master™, which combines a 40W, battery-operated PIM analyser with a 2 MHz to 3 GHz cable and antenna analyser, eliminating the need to carry multiple instruments to measure the RF performance of a cell site. The MW82119B provides tower and maintenance contractors, network installers, and wireless service providers with the first handheld field passive intermodulation (PIM) analyser with line sweep capability so they can fully certify cell site cable and antenna systems.
10/01/2014 | 1331
Keysight Technologies, Inc. announced the availability of new signal processing firmware for its family of U53xxA PCIe digitizers. The new firmware (option -TSR) allows simultaneous capture and transfer of acquired data in triggered applications.
09/26/2014 | 1489
The R&S HMC804x power supplies developed by Rohde & Schwarz subsidiary HAMEG Instruments are equipped with one (R&S HMC8041), two (R&S HMC8042) or three (R&S HMC8043) channels. All models from this series deliver up to 100 W of power and are adjustable between 0 V and 32 V in steps of 1 mV. They also offer a range of attractive extra functions.
09/23/2014 | 1219
Texas Instruments and the Texas Instruments (TI) Foundation recently made a combined $1.3 million in contributions to a variety of North Texas arts and culture organizations, continuing TI's commitment to help enhance the quality of life in its headquarters community.
09/10/2014 | 1432
Yokogawa Electric Corporation announces the November release of Energy Performance Analytics (EP-Analytics), a software tool that uses energy performance indicators (EnPI) to track how energy is being consumed in a plant, identifies gaps between EnPI targets and actual performance, and helps to identify countermeasures to improve energy performance. The EP-Analytics software is powered by the Visual MESA™ energy management and optimization solution.
News 1041 - 1050 of 1459 First | Prev. | 103 104 105 106 107 | Next | Last |
|
Site mapPrivacy policyTerms of Use & Store PoliciesHow to BuyShippingPayment |