AKTAKOM ATA-2502 is a clamp meter-adapter with analog output. If you connect it to a multimeter the measurement results will be displayed on the display of this multimeter. If you connect ATA-2502 (analog of Lutron CA-502) to an oscilloscope you will be able of researching a signal waveform.
| DC Current (DCA) | 1000 A |
| DCA Accuracy | ±1.5% |
| AC Current (ACA) | 1000 A |
| ACA Accuracy | ±1.5% |
| Jaw size | 1.32 in / 33.5 mm |
| Power supply | 9V battery |
| Dimensions | 7.48 x 2.52 x 1.3 in / 190 x 64 x 33 mm |
Specifications
- ACA measurement: 0...1000 A; 2 ranges (200 A, 1000 A)
- DCA measurement: 0...1000 A; 2 ranges (200 A, 1000 A)
- Frequency range: 40...400 Hz
- Output signal: 1 mV per 1 A (AC, DC)
- Max. conductuctor size: 1.32 in (33.5 mm) diameter
- DCA zero adjustment
- Hall effect sensor
- Low battery indicator
- Power supply: 006P, MN1604 (PP3) DC 9 V battery
- Operating temperature: 0...50 °C (32...122 °F)
- Operating humidity: <80% RH
- Dimensions: 7.48x2.52x1.3 in (190x64x33 mm)
- Weight: 12.17 oz (345 g)
AKTAKOM ATA-2502 es un adaptador de medidor de pinza con salida analógica. Si lo conecta a un multímetro, los resultados de la medición se mostrarán en la pantalla de este multímetro. Si conecta el ATA-2502 a un osciloscopio, podrá investigar una forma de onda de señal.
