AM-2002 Insulation Tester

AKTAKOM AM-2002 insulation tester is designed to help you to identify faulty or damaged insulation, which can lead to blown circuits and risk of electrical shock. AM-2002 insulation tester (analog of Lutron DI-6300) uses a high voltage, low current DC charge to measure the insulation resistance of wires. AM-2002 insulation tester (also known as megohmmeter) provides high accuracy measurements in a wide range at various test voltages.

AM-2002 Insulation Tester Features and Benefits

• Insulation measurement range: 200MOhm (100V), 200MOhm (250V), 200MOhm (500V), 1000MOhm (1000V)
• ACV & OHM measurement
• Precision 200 Ohm range easy for measuring low resistance such as motor windings, relay coils etc.
• Insulation measurement with high drive current, short circuit current >2.55mA
• 18mm (0.7") large LCD display
• LSI-circuit provides high reliability and durability
• Overload protection for each range
• Automatic zero adjust & automatic circuit discharge
• Durable & portable housing case with the front protective cover

Specifications

General specifications:

Display: 18mm (0.7") LCD (Liquid Crystal Display), Max indication 1999

Measurement:
Insulation: 200MOhm/100V, 200MOhm/250V, 200MOhm/500V, 1000MOhm/1000V
ACV: 600ACV
OHMS: 200Ohm
Sampling Time: 0.4s.
Megohm Respond Time: Max. approx. 2.5s
Zero Adjustment: Automatic adjustment
Overload: Indication of "1"
Operating Temp:. 0 to 50°C (0 to 122°F)
Operating Humidity: Less than 80%RH
Power Supply: DC 9V (6 x 1.5V AA battery, recommended to use the alkaline or heavy duty battery)

Power Consumption: Approx. 100mA (1000MOhm/1000V range)

• Approx. 28mA (200MOhm/500V range)
• Approx. 28mA (200MOhm/250V range)
• Approx. 13mA (200MOhm/100V range)
• Approx. 10mA (200Ohm/OHMS range)
• Approx. 1.6mA (600ACV/ACV range)

Electrical specifications (23±5°C):

Insulation:

Range	Accuracy	Resolution	Test voltage	Short circuit current
200MOhm (100V)	±(3%+1d)	0.1MOhm	>2M, 100V+5%	Approx. 2.55 to 2.8mA
200MOhm (250V)	±(3%+1d)	0.1MOhm	>2M, 250V+5%
200MOhm (500V)	±(3%+1d)	0.1MOhm	>2M, 500V+5%
1000MOhm (1000V)	±(3%+1d)	1MOhm	>10M, 1000V+5%

Remark: Accuracy are specified under the measuring value > 2Mohm

OHMS:

Range	Accuracy	Resolution	Open Circuit Voltage	Overload Circuit Protection
200Ohm	±(1%+1d)	0.1Ohm	Approx. 3V	AC/DC 500V (within 20s)

AC voltage:

Range	Accuracy	Resolution	Input impedance	Overload Circuit Protection
600ACV	±(1%+2d)	1ACV	4.5MOhm	600ACV

Dimensions: 6.3x4.7x3.3in / 160x120x85mm, with housing front cover
Weight: 1.3lb / 575g

Standard Accessories

• User Manual

• Alligator Clips

OHMS Measurement (Continuous Check)

Do not apply the external voltage to the input terminals!

1. Connect the RED test plug into "ohm terminal" (3-5, Fig. 1)
2. Connect the BLACK test plug into "COM terminal" (3-5, Fig. 1)
3. Rotate the "Function/Range Switch" (3-2, Fig. 1) to the "200ohm" position.
4. Connect test alligator clips into circuit under test.
5. Push the "Test Button" (3-4, Fig. 1) for measurement.

Remark: A continuity beeper is equipped. If the measured resistance < approx. 50ohm, the beeper sounds will be generated.

3-1 Display 3-2 Function/Range Switch 3-3 Power Lock/Manual(off) Switch 3-4 Test Button 3-5 Input Terminal 3-6 Battery Cover/Compartment

Mega OHM Measurement (Insulation Measurement)

Do not touch the input terminals & the test lead's pins during the measurements.
Do not apply external voltage to input terminals at any time.

1. Connect the RED test plug into "Hi terminal" (3-5, Fig. 1)
2. Connect the BLACK test plug into "Lo terminal" (3-5, Fig. 1)
3. Rotate the "Function/Range Switch" (3-2, Fig. 1) to the "200Mohm/100V", "200Mohm/250V", "200M ohm/500V" or "1000Mohm/1000V" position according the user's requirement.
4. Connect the test ALLIGATOR CLIPS into the circuit under test.
5. Push the "Test Button" (3-4, Fig. 1) for measurement.

ACV Measurement

Do not apply the overload voltage to the input terminals!

1. Connect the RED test plug into "ACV terminal" (3-5, Fig. 1)
2. Connect the BLACK test plug into "COM terminal" (3-5, Fig. 1)
3. Rotate the "Function/Range Switch" (3-2, Fig. 1) to the "600ACV" position.
4. Connect test alligator clips into circuit under test.
5. Push the "Test Button" (3-4, Fig. 1) for measurement.

El medidor de aislación AKTAKOM AM-2002 fue disenado para medir la tensión de aislamiento.

Características

• Rango de medición del aislamiento: 200MOhm (100V), 200MOhm (250V), 200MOhm (500 V), 1000MOhm (1000)
• Medición de ACV & OHM
• Rango de precisión de 200 Ohm para mas fácil medición de la resistencia baja de bobinas del motor, bobinas de relé, etc
• Mediciones del aislamiento con corriente alto voltaje. Corriente de cortocircuito 2.55mA
• Pantalla LCD de 18mm (0.7")
• Circuito LSI que proporciona una gran fiabilidad y durabilidad
• Protección de sobrecarga para cada rango
• Ajuste automático a cero y vaciado automático del circuito
• Carcasa resistente y portátil caja con cubierta protectora delantera