AEL-8320 Programmable Electronic Load

AKTAKOM AEL-8320 Programmable Electronic Load
Click an image to enlarge
Brand: AKTAKOM
Warranty: 1 year
RS-232 (Recommended Standard 232)

Programmable electronic load designed to operate as a load when testing, setting and adjusting power units, amplifiers, sound-reproducing equipment and other radio assembly equipment.

Retail price: $749.00

Depending on a destination shipping cost may vary.
Free shipping for orders over $450
on items weighting under 20 lbs
(certain restrictions apply!)

See shipping page for international rates
or contact sales@tmatlantic.com

Sold out

Subscribe

AKTAKOM AEL-8320 programmable electronic load is designed to operate as a load when testing, setting and adjusting power units, amplifiers, sound-reproducing equipment and other radio assembly equipment with supply voltage of up to 80 V, up to 30 A load current, up to 250 W power consumption.

Features:

  • LCD with backlight;
  • High resolution of ADC – 24 bits, DAC – 17 bits;
  • Load operation modes: load voltage stabilization, load current stabilization, resistance stabilization, power stabilization (limitation);
  • Discrete setting of input parameters (with the keyboard typing directly or in step-by-step mode);
  • Auto calibration;
  • Protection types: overvoltage, overcurrent, overpower, overheat, wrong polarity;
  • Batteries test;
  • Dynamic testing support with rising and falling edge setting;
  • External triggering support;
  • Short circuit mode;
  • On a list operation;
  • Control over RS-232 by SCPI commands;
  • LabView support.

InterfaceRS-232, GPIB

Specifications:

Input parameters

  • Current: 0~30 A
  • Voltage: 0~80 V
  • Power: 250 W
  • Min. operating voltage on the full current range: 0.6 V

DC mode

  • Range: 0~3 A / 0~30 A
  • Resolution: 0.1 mA / 1 mA
  • Inaccuracy: 0.1℅+5 mA / 0.1℅+10 mA

DC voltage mode

  • Range: 0~80 V
  • Resolution: 1 mV
  • Inaccuracy: 0.1℅+10 mV

Fixed resistance mode

  • Range: 0.02~2 Ω / 2~200 Ω / 20~2000 Ω
  • Resolution: 0.1 mΩ / 8.6 µS / 0.96 µS
  • Inaccuracy: 0 0.5℅+12 mΩ / 0.3%+1.25 µS / 0.3%+0.625 µS

Constant power mode

  • Range: 0~250 W
  • Resolution (<100 W/ ≥ 100 W): 1 mW /10 mW
  • Inaccuracy: 0.2℅+600 mW

Current measurement

  • Range: 0~3 A / 0~30 A
  • Resolution: 0.1 mA / 1 mA
  • Inaccuracy: 0.05℅+4 mA / 0.05℅+8 mA

Voltage measurement

  • Range: 0~80 V
  • Resolution: 1 mV
  • Inaccuracy: 0.1℅+8 mV

Power measurement

  • Range: 0~250 W
  • Resolution (<100 W/ ≥ 100 W): 1 mW/10 mW
  • Inaccuracy: 0.1℅+600 mW

Current rise rate

  • CC upper range: 1 mA/µs~3 A/µs
  • CC upper range: 100 µA/µs ~300 mA/µs
  • Resolution: 1 mA/µs
  • Inaccuracy: 3% + 10 µs

Dynamic mode

  • Type: continuous, pulse, switchable
  • Frequency range: 0.38 Hz~50 kHz
  • Time range: 0~655,35 ms
  • Resolution: 10 µs
  • Inaccuracy: 0.2℅+10 µs
  • Rise/fall time 10 µs ~655,35 ms
  • Resolution: 10 µs
  • Inaccuracy: 0.2℅+10 µs

On a list operation

  • Step time: 10 µs ~ 100000 s
  • Resolution: 10 µs
  • Inaccuracy: 0.2℅+10 µs
  • Step qty: 1~50
  • Cycle: 1~65535
  • List: 7 lists

Batteries test

  • Discharge time: 1 s~100 h
  • Resolution: 1s
  • Inaccuracy: 0.2℅+1 s
  • Battery capacity: 1 mA•h~3000 A•h
  • Resolution: 1 mA•h
  • Inaccuracy: 0.3℅+0.01A•h

Short circuit

  • CCL mode: 3.3 A
  • CCH mode: 33 A
  • CV mode: 0 V
  • CRL mode: 0.018 Ω
  • CRM mode: 1.8 Ω
  • CRH mode: 18 Ω
  • CPV mode: 270 W
  • CPC mode: 0 W

Max. rise rate

  • Current: 3 A/µs
  • Voltage: 0.6 Â/µs

Triggering input

  • Level: TTL, falling edge
  • Duration: ≥10 µs

Max. input level

  • Current: 33 A
  • Voltage: 84 V

Protection mode

  • Overvoltage
  • Overcurrent
  • Overpower
  • Overheat
  • Wrong polarity

Reverse-current protection

  • Input is off: 25 A
  • Input is on: 40 A

Ripple and noise

  • Current (rms / peak to peak): 3 mA/30 mA
  • Voltage (rms): 5 mV
  • Interface: RS232; GPIB, USB - option
  • Supply: AC voltage 110 V or AC 220 V±15℅
  • Frequency: 48…63 Hz
  • Weight: 12.8 lb / 5.8 kg.

Accessories:

  • Power cable
  • User manual

La carga electrуnica programable AKTAKOM AEL-8320 estб diseсada para funcionar como una carga cuando se prueban, configuran y ajustan unidades de potencia, amplificadores, equipos de reproducciуn de sonido y otros equipos de ensamblaje de radio con voltaje de alimentaciуn de hasta 80 V, hasta 30 A de corriente de carga, Hasta 250 W de consumo de energнa.

Caracteristicas:

  • LCD con luz de fondo;
  • Alta resoluciуn de ADC - 24 bits, DAC - 17 bits;
  • Modos de operaciуn de carga: estabilizaciуn de voltaje de carga, estabilizaciуn de corriente de carga, estabilizaciуn de resistencia, estabilizaciуn de potencia (limitaciуn);
  • Configuraciуn discreta de los parбmetros de entrada (con el teclado escribiendo directamente o en modo paso a paso);
  • Calibraciуn automбtica;
  • Tipos de protecciуn: sobretensiуn, sobrecorriente, sobrecarga, sobrecalentamiento, polaridad incorrecta;
  • Prueba de baterнas;
  • Soporte de pruebas dinбmicas con ajuste de flanco ascendente y descendente;
  • Soporte de disparo externo;
  • Modo de cortocircuito;
  • En una operaciуn de lista;
  • Control sobre RS-232 por comandos SCPI;
  • Soporte de LabView.

Back to the section
Site map|Privacy policy|Terms of Use & Store Policies|How to Buy|Shipping|Payment|© T&M Atlantic, Inc., 2010-2024